IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mm

IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mm

Marsoni

M251S

$76.10

Get it in 3 business days with 1 day shipping. Friday, May 29

IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mmThis series is classed as radial spherical plain bearings. Made up of sliding contact surfaces of steel against steel and also steel against brass. Bearingtech offer these bearings spherical plain bearingsin sealed andunsealed and therefore some maintenance and some don't, the maintenance is in termsof re lubrication from the sides of the ball. Some of these bearings will look like the out raceways are cracked or split, however this is a normal part

Easy Shipping

Quick Dispatch:

Your IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mm orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mm ships.

Need Help?
Questions about IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mm, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for IKO SB60A Radial Spherical Plain Bearing Steel-Steel 60x100x53mm in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Perfect fit for 2024 CRV Hybrid Touring. But read if you are DIYing. Its easy but not so easy. Saw a couple of DIY YT videos. Removing the cover is a b*t*h. Use 6mm socket instead of a screw driver. Using socket is very important and a safe bet. The screws are deep and will need several turns to fully unscrew. A magnetic socket is recommended. Don't lose the screw and the 2 washers along with it. Removing the cover is tricky but not hard. Remember, no force is needed anytime during. It slides off of the rubber gasket when you lift a bit and pull it to the right. Once released you need to get it up, out and over that narrow space (the tricky part) to reach the filter. Replace the filter correctly as it has orientation. Putting the cover back is even trickier because the gap is narrower than the cover. Use your brain not force like a puzzle. Once back into the very narrow gap it slides back on the rubber ring/gasket effortlessly. Just double check the alignment before screwing. Absolutely hand turn the screws a good few turns to make sure you are NOT cross threading them before powering (avoid) it. ONLY HAND TIGHTEN SNUG. NO TORQUE NEEDED. I don't like the placement of this engine air filter chamber. Its far back and in a very tight space. Since this is going to be a frequently changed part it should have been more conveniently placed. Not happy with Honda design on this.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on November 28, 2025

Verified Purchase

Birmingham, US

★★★★★ 5

Fit perfect

Same as what I replaced. Nice filter

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on November 25, 2025

Verified Purchase

amazoncritic

Battle Creek, US

★★★★★ 5

Perfect fit 2023 Honda accord hybrid touring

This was the 2nd air filter I purchased of a different brand, the first 1 claimed to fit my 2023 Honda accord but it was too small. This one fit exactly to the spec and it was easy to install myself.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on March 10, 2025

Verified Purchase

Casey 101

Fort Morgan, US

★★★★★ 5

Hard to find

Fit perfect

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on February 17, 2025