Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser Clone

Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser Clone

Marsoni

M251S

$399.50

Get it in 3 business days with 1 day shipping. Friday, May 29

Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser CloneThe original ARP 2600 semi modular synthesizer became an instant hit and was quickly adopted by lots of renowned musicians including Pete Townshend, Herbie Hancock and Jean Michel Jarre, to name a few. Soon after the first models were released, ARP made a bright blue version of Model 2600 called the Blue Marvin, named after ARP CFO Marvin Cohen. Then, in mid 1971, the blue face plate was replaced with a gray plate, and this new unit was nicknamed the

Easy Shipping

Quick Dispatch:

Your Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser Clone orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser Clone ships.

Need Help?
Questions about Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser Clone, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Behringer 2600 Blue Marvin ARP 2600 Analogue Synthesiser Clone in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 16, 2026

Verified Purchase

Nancy filippi

Pawtucket, US

★★★★★ 5

A must pull your gimbal bearing

You do need to drill a hole but worked perfect

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on December 26, 2025