Dust Filter - AF27899 - Sparex Part S.119389

Dust Filter - AF27899 - Sparex Part S.119389

Marsoni

M251S

$22.98

Get it in 3 business days with 1 day shipping. Friday, May 29

Dust Filter - AF27899 - Sparex Part S.119389Dust Filter AF27899 Sparex Part No. S. 119389 Product Specifications Brand Fleetguard Media Type Standard Overall Height 10 mm Overall Length 522 mm Overall Width 78 mm Reference AF27899 Tariff Code 8421230090 Compatibility Information This Dust Filter is compatible with a range of Ford New Holland models, including: T6010 T6020 T6030 T6040 T6050 T6060 T6070 T7. 175 T7. 190 T7. 210 T7. 225 T7. 230 T7. 245 T7. 260 T7. 270 T7030 T7040 T7050 T7060 TS100A

Easy Shipping

Quick Dispatch:

Your Dust Filter - AF27899 - Sparex Part S.119389 orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Dust Filter - AF27899 - Sparex Part S.119389 ships.

Need Help?
Questions about Dust Filter - AF27899 - Sparex Part S.119389, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Dust Filter - AF27899 - Sparex Part S.119389 in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on December 16, 2020

Verified Purchase

Marina De Leon

Lowell, US

★★★★★ 5

Nice

Size: 16AWG Wiring Harness-2 Leads

Worked great, easy to install

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on January 8, 2026

Verified Purchase

Dan from Georgia

Dallas, US

★★★★★ 4

Wire length between the two connectors is short for a full-size pickup

Size: 16AWG Wiring Harness-2 Leads

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 1, 2025

Verified Purchase

Nate Higgers

Charlottesville, US

★★★★★ 5

great value

Size: 16AWG Wiring Harness-2 Leads

very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 30, 2026

Verified Purchase

Lee Mintz

Natrona Heights, US

★★★★★ 5

The Easiest!

Size: 16AWG Wiring Harness-2 Leads

This is one of the best and easiest wiring system to install that I have every used. And the price is great!

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 11, 2025